Sorry, this particular job is closed. But feel free to fill out a General ApplicationSearch Jobs
We are currently seeking a Welder for a position in Duluth, GA. The Welder welds metal parts together using specified wire welding processes, and performs related tasks such as finishing and grinding.
Responsibilities of the Welder
- Uses MIG welder to assemble fabricated metal products in an efficient manner to maximize production.
- Operates the equipment in a safe manner and reports hazards associated with the equipment or it’s operators to the Welding Supervisor.
- Produces strong penetrated welds that are smooth, non-porous, and consistent.
- Follows required procedures and uses appropriate jogs and fixtures to assist in the fabrication process.
- Maintains/produces a level of output that will minimize production delays.
- Cleans and maintains an orderly work area.
- Communicates effectively with other workers and with Supervisors to direct product flow.
- Assist other individuals in area when needed.
- Must be able to communicate (read, write and speak) the English language clearly
Requirements of the Welder
- Knowledge of the welding process and equipment.
- Ability to weld vertical, flat, and overhead welds with a good penetration and quality appearance.
- Ability to operate a plasma cutter and acetylene torches.
- Good communications skills relative to supervisor and other related departments.
- Math skills including fractions and angles.
- Ability to read tape measures and angle finders.
- Ability to read blueprint drawings and cut lists.
- Ability to lift 100 pounds; 50 pounds with some regularity.
- Physical ability to work and weld in awkward positions such as kneeling, lying down, and overhead.
- Ability to climb and work from a ladder.
- Ability to operate various shop tools (including power and manually operated).
- Trained in overhead crane operation.
This is a first shift position (7 AM - 3:30 PM) with an average of 10 hours OT each week. The pay rate is between $15 and $17 per hour depending on results of weld test.
If you would be interested in applying for this position directly, please send your resume to firstname.lastname@example.org
- Stockroom Lead in Methuen MA
- Manufacturing Engineer in Bedford MA
- Customer Service Representative in Lowell MA
- Mechanical Designer in Waltham MA
- Material Handler (Production) 9-26 in Westborough MA
- Machinist - 3rd Shift in Newton MA
- Quality Engineer in Central Manchester CT
- Maintenance Mechanic - 3rd shift in Lincoln RI
- Electrical Technician in Audubon PA
- Distribution Associate I in Memphis TN
- Quality Technician in Memphis TN
- Electrical Engineering Technician in Milford MA
- Program Manager II in MA
- Stockroom Clerk in Gainesville GA
- Entry Level Mechanical Design Engineer in Bedford NH
- Test Technician in Acton MA
- Contract Technical Writer in Milford MA
- Software & Automation Engineer in Bedford MA
- Financial Analyst II in Milford MA
- Temp Cycle Count Associate in Holliston MA
- 2nd Shift Fulfillment Supervisor in Plymouth MA
- Test Engineer in Manchester NH
- Customer Data Entry Associate in Lowell MA
- Tack Welder in Duluth GA
- Shipping and Receiving Clerk in Santa Ana CA
- Product Development Engineer in Middleborough MA
- Synthesis Operator, 2nd shift in Taunton MA
- Maintenance Technician in Lawrenceville GA
- Senior Manufacturing Engineer in Winston-Salem NC
- Receptionist-Support specialist in Memphis TN
- Inside Sales Rep in Golden CO
- Senior Packaging Compliance Engineer in Woburn MA
- Lead Maintenance Mechanic in Memphis TN
- Temp Help in Duluth GA
- Software Quality Assurance Engineer in Merrimack NH
- Senior Operations Quality Engineer in Milford MA
- Manufacturing Technician in Wilmington MA
- Director of Program Management in Providence RI
- Senior Mechanical Engineer in Woburn MA
- Principal Electrical Engineer - FPGA in Merrimack NH
- Sr Engineering Technician in Merrimack NH
- Maintenance Mechanic in Minneapolis MN
- Kitting-Assembler in Holliston MA
- Shipper-Receiver in Taunton MA
- Electronics Assemblers, Technicians & Solderers in Burnsville MN
- RMA Technician in Lawrenceville GA
- Enclosure Assembler in Roswell GA
- Assembly Technician in Alpharetta GA
- Solderer Technician 1st shift in Alpharetta GA
- Client Services Representative in Lenexa KS
- Compressor Operation – Material Handler in Flowery Branch GA
- Mechanical Engineer in Merrimack NH
- Shipper- Warehouse Associate in Ashland MA
- Design Engineer in Spartanburg SC
- Run Test Supervisor in Selma TX
- Debug Technician in Westford MA
- Mechanical Assembler in Westford MA
- Contracts Administrator in Lowell MA
- Shipping Associate in Suwanee GA
- Executive Admin Assistant in Milford MA
- Pricing Data Analyst in Milford MA
- Manufacturing Supervisor in Danvers MA
- Jr Production Planner-Scheduler in Dartmouth MA
- Maintenance Mechanic in St Paul MN
- Maintenance Technician in Suwanee GA
- Shipping and Receiving Clerk in Buford GA
- Pillar House Selective Soldering Machine Operator in Manchester NH
- Equipment Operator 1st Shift in Jefferson GA
- First shift Machine Operator in Plymouth MA
- Facilities Mechanic in Plymouth MA
- Electrical Designer in Alpharetta GA
- Pulse Arc MIG Welder in Flowery Branch GA
- CNC Programmer in Olive Branch MS
- Senior Machinist in Olive Branch MS
- Machinist in Olive Branch MS
- Design Assurance Engineer in San Antonio TX
- Senior Electrical Engineer in Framingham MA
- CNC Machinist in Plymouth MA
- Mechanical Inspector in Plymouth MA
- Technical Recruiter - MA in Marlborough MA
- Supply Replenisher in Long Branch NJ
- Senior Accountant in New Castle DE
- Cable Cutting - Assembly in Alpharetta GA
- Software Engineer in Providence RI
- Quality-Weld Inspector in Doraville GA
- Welder 2nd Shift in Duluth GA
- Technical Support Representative in Marlborough MA
- Shipping Clerk - Methuen in Methuen MA
- Manufacturing Tech in Eden Prairie MN
- Digital Content Writer in Milford MA
- Electrical Engineer in Wilmington MA
- Material Handler (Production) 9-18-19 in Westborough MA
- Quality Inspector- 2nd shift in Bloomfield CT
- Test Tech- 2nd shift in Manchester NH
- Catheter Assembler in Marlborough MA
- Engineering Manager in Memphis TN
- Executive Assistant in Memphis TN
- Sr Process Development Engineer in Sunrise FL
- Molding Process Engineer in Upland CA
- Manufacturing Engineer II in Memphis TN